Where Does the Film Stop After Cutting? Understanding End Position in YINK——–YINK FAQ Series — Episode 27
When preparing a cutting job in YINK, most attention naturally goes to the patterns, layout, material, and cutter settings.
But there is another setting that can easily be overlooked:
Where will the film stop after cutting?
The cutting job may be finished, but your workflow is not.
You still need to handle the material, remove the finished film, and prepare for the next step. That is why the final position of the film can affect how convenient the workflow feels after cutting.
In YINK, the End Position setting allows you to consider what should happen when the cutting job is complete.
For longer pieces in particular, using forward feed can make the finished material easier to access and handle.
Let’s look at how this setting works and when you may want to use it.
What Is the End Position Setting?
The End Position setting determines what happens at the end of a cutting job.
Before cutting, you can check the End Position option and decide whether the material needs to be fed forward after the cutting process is complete.
This may seem like a small detail compared with selecting vehicle data or arranging PPF patterns, but it affects what happens immediately after the machine finishes cutting.
The goal is simple:
Make sure the film finishes in a position that is convenient for the next operation.
Instead of thinking only about where the cutting starts, also think about where the material will be when the job ends.
Why Does the End Position Matter?
Cutting is only one part of the workflow.
After the machine finishes, you still need to work with the finished material.
If the film stops in an inconvenient position, handling the material afterward may be less smooth.
This is especially relevant when working with longer pieces.
The End Position setting can affect later film peeling and material handling.
So the question before cutting should not only be:
“Is the pattern ready to cut?”
It should also include:
“Where do I want the film to be when cutting is finished?”
That small change in thinking can make the transition from cutting to material handling more convenient.
Check the End Position Before Cutting
The best time to think about the end position is before you start the cutting job.
Before cutting, confirm:
→ The current End Position setting
→ Whether forward feed is needed
The purpose is to make sure that, once cutting is complete, the film moves to a position that is convenient for handling.
This can become part of your normal pre-cut routine.
For example:
Check Layout → Check Cutter → Check End Position → CUT
It only adds one more check before starting, but it helps you think about the complete workflow rather than stopping at the cutting process itself.
When Should You Use Forward Feed?
Forward feed is especially useful when working with longer pieces.
For long parts, you can let the machine automatically feed the film forward after cutting.
Why?
Because after a long pattern has been cut, moving the finished film forward can make it easier to access.
Instead of having the completed material remain in a less convenient position, forward feed brings it toward a position that is easier for the operator to handle.
This can make the next steps smoother, including peeling and handling the finished film.
A simple rule to remember is:
Long piece → Consider forward feed after cutting
You do not necessarily need the same end-position behavior for every cutting job. The important thing is to consider the size and handling needs of the current job before making the choice.
End Directly vs. Forward Feed
The cutting window in YINK includes different End Position options.
For the workflow covered here, the most important distinction is whether the job should end directly or whether the film should move forward afterward.
| End Position | What It Means for the Workflow |
|---|---|
| End Directly | Use when additional forward feeding is not needed after the cutting job. |
| Forward Feed | Moves the film forward after cutting and can be useful when handling longer pieces. |
The choice depends on what you need to do with the material after cutting.
For a job where no additional forward movement is required, ending directly may be enough.
For a longer piece, forward feed may make the finished material easier to access.
The key is not to choose an option automatically every time.
Think about the next step before deciding where the current step should end.
A Simple Example: Cutting a Long PPF Pattern
Imagine you are preparing a longer PPF pattern.
The vehicle data is correct.
The pattern has been arranged.
The material is loaded.
The cutter is ready.
At this point, it may seem like the only thing left to do is click CUT.
But there is one more useful question:
What should happen to the film after the pattern is finished?
For a longer piece, you can select a forward-feed end position so that the material moves forward after cutting.
The cutting itself has not changed.
What changes is the position of the finished material afterward.
That can make the next handling step easier.
This is why End Position is not really about improving the pattern itself. It is about improving the transition between cutting and handling the finished film.
Don’t Think of CUT as the End of the Workflow
It is easy to think of a PPF cutting workflow like this:
Prepare → Arrange → CUT → Done
But from an operator’s perspective, there are still steps after the cutter finishes.
A more complete workflow is:
Prepare → Arrange → Check → Set End Position → CUT → Handle the Film
This is an important distinction.
The software is not only helping you prepare the cutting job. Some settings also affect what happens immediately after the cutting process.
That is why the End Position setting deserves a quick check before you begin.
A Better Cutting Workflow
You can combine this setting with the other checks you already perform before cutting.
A simple workflow is:
1. Review the Layout
Make sure the patterns are ready for cutting.
2. Check the Cutter
Confirm that the machine is ready.
3. Check the End Position
Decide whether the film should end directly or move forward after cutting.
4. Start Cutting
Send the job to the cutter.
5. Handle the Finished Film
Once cutting is complete, continue with peeling, unloading, or the next operation.
This creates a smoother connection between what happens on the screen, what happens on the machine, and what you need to do afterward.
A Quick End Position Checklist
Before starting the cutting job, ask yourself:
→ Is the End Position setting correct?
→ Do I need the film to feed forward after cutting?
→ Is this a longer piece that will be easier to handle if it moves forward?
→ Will the finished film stop in a convenient position for the next operation?
If these questions are clear, you are ready to continue.
There is no need to make the setting complicated.
The goal is simply to avoid ignoring it.
Conclusion
The position of the film after cutting may seem like a small detail, but it is part of the complete cutting workflow.
Before starting a job in YINK, remember to check:
→ The End Position setting
→ Whether forward feed is needed
For longer pieces, letting the machine feed the film forward after cutting can make the finished material easier to access and handle.
The main idea is easy to remember:
Cutting is not the end. Where the film stops also matters.
FAQ
What is End Position in YINK?
End Position is a cutting setting that determines what happens at the end of the cutting job, including whether the film should be fed forward afterward.
When should I use forward feed after cutting?
Forward feed is recommended for longer pieces when moving the film forward after cutting can make the finished material easier to access and handle.
Why should I check End Position before cutting?
Checking it beforehand helps ensure that the film finishes in a convenient position for the next operation, rather than thinking only about the cutting process itself.
Does the End Position change the PPF pattern?
No. The End Position setting is used to control the end-of-job behavior and the position of the material after cutting rather than changing the PPF pattern itself.
Post time: Sep-28-2026
